HP LaserJet 4700 - Manual (Page 41)

To test the configuration of a destination list
1 Click the Test button next to the destination list that you want to test. (If no permanent storage
device is installed, only one destination can be tested from this window.)
The following window appears.
Figure 3-5 Alerts – test screen
2 If you have a permanent storage device installed, select the destinations that you want to test.
3 The return address is the product's e-mail address. Type your e-mail address in the Return
Address box if you would like to receive messages about any errors that are generated from the
test alert (for example, to be notified of an incorrect destination address).
ENWW Alerts 31
Settings