HONDA 2002 Accord Coupe - Owner's Manual - Manual (Page 261)

4-cylinder models
6-cylinder models
6-cylinder models
With automatic transmission:
With 5-speed manual transmission:
4-cylinder models
4-cylinder models
6-cylinder models
Put a new washer on the drain bolt,
then reinstall the drain bolt in the
engine block. Tighten it securely.
Tightening torque:
Tighten the drain bolt at the rear
of the engine cylinder block
securely.
Tightening torque:
When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator.
Loosen the bleeder bolt on top of
the engine.
Pour Honda All Season
Antifreeze/Coolant Type 2 into
the radiator. This coolant is a
mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.
The cooling system capacity is:
Tighten the bleeder bolt when
coolant comes out in a steady
stream with no bubbles.
Pour coolant into the radiator up
to the base of the filler neck.
7.
6.
5.
Cooling System
Maintenance 258
B B L L E E E E D D E E R R B B O O L L T T
61 lbf·ft (83 N·m , 8.5 kgf·m)
7 lbf·ft (10 N·m , 1.0 kgf·m)
1.43 US gal (5.4 , 1.19 Imp gal)
1.45 US gal (5.5 , 1.21 Imp gal)
1.48 US gal (5.6 , 1.23 Imp gal)
Main Menu Table of Contents