HONDA 2002 Accord Coupe - Owner's Manual - Manual (Page 155)

To load multiple CDs in one
operation:
Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded.
If you are not loading CDs into all six
positions, press the Load button
again after the last CD has loaded.
The system will begin playing the
last CD loaded.
If you stop loading CDs before all six
positions are filled, and you do not
press the Load button, the system
will wait for ten seconds, then stop
the load operation and begin playing
the last CD loaded.
To load a single CD:
Press and release the Load button.
Press and hold the Load button
until you hear a beep and see
‘‘LOAd’’ in the display, then
release the button.
On the upper left side of the
display, the disc number for an
empty position will begin blinking
and the green CD Loaded
indicator will come on.
When the disc number for an
empty position starts to blink and
the green CD Loaded indicator
comes on, you will see LOAd in
the display, then insert the disc
into the CD slot. Insert it only
about halfway, the drive will pull it
in the rest of the way.
When LOAd appears again in the
display, insert the next disc into
the CD slot.
Insert the disc into the CD slot.
Insert it only about halfway, the
drive will pull it in the rest of the
way. You will see BUSY in the
display. The CD loaded indicator
turns red and blinks as the CD is
loaded.
The system will load the CD, and
begin playing it.
1.
2.
3.
4.
5.
1.
2.
3.
Audio System
Comf ort and Convenience Features
Loading CDs in the Changer
152
Main Menu Table of Contents