beautypg.com

Changing a flat tire – HONDA 2005 Odyssey - Owner's Manual User Manual

Page 364

background image

Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:

Remove the bracket from the jack
storage area by unscrewing the
bracket mounting bolt.

Put the flat tire in the supplied
vinyl bag. This bag is in the jack
storage area.

You will find a u-shaped slit on the
carpet behind the seat bottom of
the third seat. Pull up the carpet at
the slit, and remove the plastic
screw with a coin.

Lower the vehicle to the ground,
and remove the jack.

Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.

13.

14.

15.

17.

18.

16.

CONTINUED

Changing a Flat Tire

T

a

k

ing
Ca
re

of
th

e

U

ne
x

p

e

c

te

d

363

BRACKET

BRACKET MOUNTING BOLT

94 lbf·ft (127 N·m , 13 kgf·m)

Main Menu

Table of Contents