beautypg.com

Multi-information display – HONDA 2005 Odyssey - Owner's Manual User Manual

Page 101

background image

While the multi-information display
shows ‘‘METER SETUP,’’ press the
SEL/RESET button on the steering
wheel. The display changes to the
‘‘CUSTOMIZE MENU.’’ Press the
INFO button repeatedly until you see
‘‘COMPASS ZONE SELECTION’’ in
the lower segment as shown above.

Press the SEL/RESET button. The
display changes as shown above.
The highlighted ‘‘- -’’ display in the
lower segment is the zone number; it
changes from ‘‘1’’ thru ‘‘15’’ each
time you press the INFO button.

In most areas, there is a variation
between magnetic north and true
north. Zone selection is required so
the compass can compensate for this
variation. To check and select the
zone set into the compass, do the
procedure on the following pages.

On models without Navigation System

Compass Zone Selection

Multi-Information Display

100

Main Menu

Table of Contents