beautypg.com

Cleaning the seat belts, Floor mats, Lights – HONDA 2007 Accord Hybrid - Owner's Manual User Manual

Page 219

background image

To change the passenger’s side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver’s side bulb, turn
the steering wheel to the right.

Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.

To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.

Install the new bulb and turn it
clockwise to lock it in place.

Insert the socket into the
headlight assembly. Turn it
clockwise to lock it in place.

Test the new bulb to make sure it
works.

Put the inner fender cover in place.
Install and lock each holding clip
by pushing on the center.

Pull the inner fender cover away
from the fender and bumper.

Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.

1.

3.

2.

4.

8.

7.

6.

9.

5.

Replacing the Front Side Marker/
Turn Signal and Parking Light
Bulb

Lights

216

HOLDING CLIPS

BULB

06/08/08 14:51:13 31SDR620_221

Main Menu

Table of Contents

s

t

Main Menu

Main Menu

Table of Contents