HONDA 2007 Accord Hybrid - Owner's Manual - Manual (Page 123)

Pick the preset number (1 6)
you want for that station. Press
the left or right side of the bar or
icon and hold it until you hear a
beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Each side of the bars (1
6) or preset icon can store one
frequency on AM, and two
frequencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
bar or icon.
The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 5 seconds.
If you do nothing, the system will
scan for the next strong station and
play it for 5 seconds. When it plays a
station you want to listen to, press
the SCAN button again. Push the AUDIO button to view
the audio display. You will see the
six preset icons.
Use the tune, seek, or scan
function to tune the radio to a
desired station.
1.
2.
3.
4.
On vehicles with navigation system
Preset SCAN
Playing the AM/FM Radio
120
06/08/08 14:36:26 31SDR620_125
Main Menu Table of Contents s t Main Menu ▲ ▼ Main Menu ▲ ▼ Table of Contents