System start-up, System language selection, Getting started – HONDA 2014 Pilot - Navigation Manual User Manual
Page 19
18 Navigation System
System Start-up
When you turn the ignition to ON (II), it
takes about 10 seconds for the
navigation system to boot up.
The first screen to appear is the
navigation system globe screen. The
screen then changes to the
Disclaimer
screen:
NOTE:
The
OK button does not appear until
after the software is loaded.
System Language Selection
Move the
Interface Dial to the right to
select
CHANGE LANGUAGE. On the
Select a language screen, you can
select the language to be used by the
entire system by choosing from the
language choices that are displayed.
After you have changed the language
settings, you will be returned to the
Disclaimer screen.
Read this disclaimer carefully so you
understand it before continuing. Push in
on the
Interface Dial to select OK, and
the
map screen will appear on the
display. The “OK” cannot be activated
by voice.
If you do not push in on the
Interface
Dial within 30 seconds, the screen
displays wallpaper or the clock screen.
(See page 81.) To return to the
Disclaimer screen, press any navigation
“hard” button or voice control button.
NOTE:
Voice commands will not funcion if
OK
is not selected.