beautypg.com

System initialization 222, System initialization, Entering the security code p. 222 – HONDA 2015 Fit - Navigation Manual User Manual

Page 223: Entering the security code, Acquiring gps information

background image

222

Reference Inf

o

rmation

System Initialization

The navigation system must be initialized if
power to the navigation system is
interrupted for any reason (e.g., the battery
was disconnected).

Entering the Security Code

Find the navigation system’s security code
and serial number label in your Owner’s
Manual kit. Do not store the label in your
vehicle. If you lose the label, you must first
retrieve the serial number, and then obtain
the code. You can find out about your serial
number and security code from a dealer.

1. Set the power mode to ON, and turn on

the audio system.

2. Press and hold the audio system power

button for more than two seconds.

u

The system is reactivated when the
system’s control unit recognizes that
the system is in your vehicle. If the
control unit fails to recognize, Enter
Code appears on the navigation
screen.

3. Enter the security code.

u

If you do not enter the security code
correctly after 10 tries, leave the
system for one hour before trying
again, or visit a dealer to have the
system reset.

In the U.S., you can register the security
code on Honda Owners
(owners.honda.com). To find information
on how to retrieve the serial number and
obtain the code, visit
radio-navicode.honda.com.

Acquiring GPS Information

Depending on the length of time the power
was interrupted, your system may require
GPS initialization.

If initialization is not necessary, the system
proceeds directly to the Startup
Confirmation screen.

If the system fails to locate a sufficient
number of satellites to locate your position
within 10 minutes, the following screen is
displayed.