Tire pressure monitoring system (tpms), Auto door locks – HONDA 2015 Fit (EX/EX-L) - Technology Reference Guide (Revised 10/11/2014) User Manual
Page 6
8
9
What to Do
TIRE PRESSURE MONITORING SYSTEM (TPMS)
Monitors the vehicle’s tire pressures.
1. Visually inspect the tires for damage.
2. Use a tire air pressure gauge to
check which tire(s) have low
pressure.
3. Inflate the tire(s), if necessary, to the
recommended pressures listed on
the label on the driver’s doorjamb.
4. Start TPMS calibration.
How It Works
When the tire pressure drops
significantly below recommended
levels, the low tire pressure
indicator comes on.
What to Do
Any time you inflate, change, or rotate one or more of your tires, you need to
recalibrate the system.
1. Make sure the shift lever is in
Park (P) or the parking brake
is applied and the vehicle is on.
2. Press and hold the TPMS
button until the low tire
pressure indicator blinks twice.
Calibration begins and will
finish automatically.
AUTO DOOR LOCKS
Changing Settings
Program all doors to unlock when you shift to Park. See your Owner’s Manual for
other programmable settings.
Note: The driver’s and front passenger’s door can be opened by pulling the inner front door
handle, regardless of the setting.
Door Locks
D e f a u l t L o c k S e t t i n g
All doors are preset to lock when your vehicle
reaches about 10 mph.
D e f a u l t U n l o c k S e t t i n g
All doors are set to unlock when the driver’s door
is opened.
Program how and when the vehicle doors automatically lock and unlock.
1. Close the driver’s door.
Shift into Park (P) or apply
the parking brake.
2. Turn the vehicle on.
3. Press and hold the unlock
side of the master door
lock switch for about 10
seconds. In that time, you
will hear three clicks.
4. Within 20 seconds, turn
the vehicle off.
15 Fit_ExExl_Ka_eng_TRG_AQS52546_ATG_NEW STYLE 9/4/2014 3:41 PM Page 6