HONDA 2015 Civic Si Sedan - Owner's Manual - Manual (Page 388)

387
uu Replacing Light Bulbs u Rear License Plate Light Bulbs
Main
tenan
ce
Rear License Plate Light Bulbs
When replacing, use the following bulbs.
1. Remove the screw from the center of the
fastener using a Phillips-head screwdriver.
2. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
3. Remove the license plate light assembly by
squeezing the tabs on both sides of the
socket.
4. Remove the old bulb and insert a new bulb.
Rear License Plate Light: 5 W
Lining
Fastener
Clip
Models with trunk lid lining
Bulb
Socket
All models