beautypg.com

P 115), P 115, Turn signals light switches – HONDA 2015 Accord Coupe - Owner's Manual User Manual

Page 116: Turn signals, Light switches

background image

115

uu

Operating the Switches Around the Steering Wheel

u

Turn Signals

Continued

Co
ntrols

Turn Signals

The turn signals can be used when the ignition
switch is in ON

(

w

*1

.

One-touch turn signal

When you lightly push up or down and release
the turn signal lever, the exterior turn signals
and turn signal indicator blink three times.

This feature can be used when signaling for a
lane change.

Light Switches

Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch

*1

.

High beams

Push the lever forward until you hear a click.

Low beams

When in high beams, pull the lever back to
return to low beams.

Flashing the high beams

Pull the lever back, and release it.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.

Right Turn

Left Turn

Manual Operation

1

Light Switches

If you remove the key from the ignition switch while
the lights are on, a chime sounds when the driver’s
door is opened.

When the lights are on, the lights on indicator in the
instrument panel will be on.

2 Lights On Indicator P. 74

If you sense that the level of the headlights is
abnormal, have the vehicle inspected by a dealer.

Do not leave the lights on when the engine is off
because it will cause the battery to discharge.

High Beams

Flashing the high beams

Low Beams

Turns on parking, side marker,
tail, and rear license plate lights

Turns on headlights, parking, side
marker, tail, and rear license plate
lights

15 ACCORD 2D-31T3L6200.book 115 ページ 2014年7月23日 水曜日 午後12時26分