GTCO Summagrid VII - Quick Start Guide User Manual

Page 2

Text mode
Original mode

Installing the Driver

Insert the CD into the CD-ROM drive on your computer and follow the onscreen prompts to
complete the driver installation. If the CD does not autorun, click the Start button on the
Windows Task Bar and select Run from the menu. Type X:\setup.exe (X represents the CD
drive letter).

Hardware Configuration

Installing Summagrid VII

NOTE: Connect ONLY USB or serial – not both.

RS-232 Serial Connection

1. Connect the corded transducer – cursor or pen – to the appropriate jack on the

digitizer’s Connector Panel. The connector is keyed and will fit only the correct jack.
Do not force it.

2. Attach the RS-232 serial cable to the serial jack on the Connector Panel. The

connector is keyed and will fit only the correct jack. Do not force it. Join the 9-pin
connector of the serial cable to the serial port on your computer.