beautypg.com

Great Planes U-Can-Do 3D EP ARF - GPMA1275 User Manual

Page 7

background image

5. When you are satisfied with the alignment of the wing,

glue it in place with hot-melt glue.

6. Use hot-melt glue to secure four hinges in the precut

slots in each aileron. Do not worry about a little excess glue
squeezing out onto the hinge pivots–it is easily removed
with a hobby knife after the glue hardens.

7. Test fit the ailerons to the wings. If necessary, enlarge

the precut hinge slots with a hobby knife.

8. Glue the outermost hinge into the wing, making sure

to keep the hinge line parallel with the TE of the wing.

9. Using the flex of the aileron to allow you to glue one

hinge in at a time, work your way inward until all four hinges
are glued in place.

10. Use a hobby knife to clean any excess glue from

the hinges.

7