Great Planes Seawind EP Rx-R - GPMA5750 - Manual (Page 16)

OTHER ITEMS AVAILABLE
FROM GREAT PLANES
ElectriFly ™ by Great Planes PBY Catalina EP Sport Scale ARF
Thrilling water takeoffs and landings are just a few hours away
with the PBY Catalina! It has the look of the 1930s-era military/
sea rescue plane, with high-quality construction features such
as a fi berglass fuselage and a factory-covered, built-up wood
wing and tail. Molded ABS wing tip fl oats and a removable
rudder combine for excellent handling on the water, with a
rubber plug in the fuselage providing easy water drainage
if needed. Twin brushless out-runner motors deliver a great
power-to-weight ratio for long fl ight times and the ability for
executing basic aerobatics. An easy-access hatch on top
allows for quick installation or removal of high-voltage, low-
weight LiPo fl ight packs. Included in the generous hardware
package are two props, prop adapters, machined aluminum
prop hubs and observation canopies. GPMA1154
Great Planes Seawind* .60 - .91 Sport-Scale ARF
No other R/C seaplane looks or fl ies like the Seawind. This
sport-scale replica of the classic homebuilt amphibious
aircraft draws attention wherever it’s fl own, whether at the
fl ying fi eld or the local lake. Substitute optional retracts for
the included fi xed landing gear and you’ll be able to fl y from
land OR water with the same plane!
The fi berglass wingtips offer excellent stability during fl ight
and double as fl oats to support the Seawind on the water.
Without the need for bulky suspended fl oats, the model fl ies
faster than typical seaplanes. Assembly moves quickly, too.
With its low number of parts, the Seawind ARF requires only
15 to 18 hours of building time. The fuselage and wingtips are
gel-coated fi berglass. The built-up wing and tail section are
made of balsa and factory-covered in Top Flite
® MonoKote ® .
The wing simply plugs into an aluminum joiner and is secured
with nylon bolts – no tools needed.
The unique boom-mounted engine design not only enhances
the model’s looks, but also reduces the likelihood of water
“spray” reaching the engine during takeoff and landing. As
your sleek Seawind ARF touches down gracefully onto the
water, it hits you: this is a seaplane like no other, in both
looks and performance. GPMA1360
* The Seawind name is used with permission of Seawind Inc.
ElectriFly by Great Planes YAK 54 3D EP ARF
Winning performance is in the YAK’s genes – and they shine
again in this all-wood, easy-to-assemble park fl yer 3D ARF.
Using today’s fi nest electric model engineering, it succeeds
at any 3D maneuver – performing demanding precision
aerobatics as well as larger models, but at smaller sites like
parks and ball fi elds. Oversize ailerons provide impressive roll
rates and superior control at all fl ying speeds. With reduced
throws, it’s also a fun and easy sport fl ier. The prebuilt, laser-
cut balsa/ply structures assemble quickly, and hardware is
included for mounting either an out-runner motor, like the
ElectriFly RimFire 35-30-950, or an in-runner such as the
ElectriFly Ammo B24-33-4040. A hand-crafted, lightweight
fi berglass cowl is also included, painted to match the high-
visibility trim scheme. GPMA1542
ElectriFly by Great Planes Power Series Balanced LiPo Packs
GPMP0605 11.1V 910mAh 20C Deans Ultra
GPMP0609 11.1V 1250mAh 20C Deans Ultra
GPMP0613 11.1V 1500mAh 20C Deans Ultra
• The best choice for all-out 3D fl ying and contest-winning
performance!
• Huge, 20C continuous discharge rate help packs stay
cooler during sustained, high-amp current loads.
• Assembled, shrink-wrapped and wired in series for
balancing, with a standard balancing connector and high-
effi ciency Deans plug.