Clarion DXZ845MC - Manual (Page 26)

26
DXZ845MC
English
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and
Radio/TV stations. The number of titles that can
be entered for each mode are as follows.
●Setting USER mode
The factory default setting is “R>8 G>8”.
As selecting “USER”, press and hold the
[COLOR] button for 1 second or longer “R>8
G>8” appears in the display.
1. Press the [ a] or [d] button to move the
cursor.
2. Turning the [ROTARY] knob clockwise or
counterclockwise to select from 0 to 8.
3. Press and hold the [ ] button for 2 sec-
onds or longer to store the color in memory
and cancel setting mode.
Operations Common to Each Mode
Setting the external amplifier
› The factory default setting is “OFF”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a] or [d] button and select
“AMP CANCEL”.
3. Turning the [ROTARY] knob clockwise or
counterclockwise and select “ON” or “OFF”.
● ON:
Use with connected AMP.
● OFF:
Use with inside AMP.
4. Press the [T] button to return to the previous
mode.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
› The factory default setting is “MID”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a] or [d] button to select
“AUX SENS”.
3. Turning the [ROTARY] knob clockwise or
counterclockwise as needed and select from
“LOW”, “MID” or “HIGH”.
4. Press the [T] button to return to the previous
mode.
Setting the button illumination
Press the [COLOR] button to select a color type.
Each time you press the [COLOR] button, the
type changes in the following order:
COLOR SCAN
➜ RED ➜ MANDARIN ➜
ORANGE
➜ AMBER ➜ YELLOW ➜
G-YELLOW
➜ LIME ➜ GREEN ➜ D-GREEN
➜ USER ➜ COLOR SCAN…
●Setting COLOR SCAN mode
As selecting “COLOR SCAN”, the color auto-
matically changes.
› The factory default setting is “COLOR SCAN”.
› After 3 second the color changes to the other.
COLOR
RED
MANDARIN
ORANGE
AMBER
YELLOW
G-YELLOW
LIME
GREEN
D-GREEN
USER
R
8
8
8
8
8
6
4
2
0
8
G
0
1
2
5
8
8
8
8
8
8
1. Press the [FNC] button to select the mode
you want to enter a title (Radio, CD, CD
changer or TV).
2. Select and play a CD in the CD changer or
tune in to a Radio/TV station for which you
want to enter the title.
3. Press the [D] button and display the main.
4. Press the [T] button.
5. Press the [ a] or [d] button to move the
cursor.
CD changer mode Number of titles
DCZ625 connected 100 titles
CDC655Tz connected 100 titles
CDC1255z connected 50 titles
Mode Number of titles
CD mode 50 titles
TV mode 20 titles
Radio mode 30 titles