beautypg.com

Playing a specific loaded compact disc – GMC 2002 Savana User Manual

Page 181

background image

3-42

Playing a Specific Loaded Compact Disc

For every CD loaded, a number will appear on the radio
display. To play a specific CD, first press the CD AUX
button to start playing a CD. Then press the numbered
pushbutton that corresponds to the CD you want to play.
A small bar will appear under the CD number that is
playing, and the track number will appear.

If an error appears on the radio display, see “Compact
Disc Messages” later in this section.

LOAD CD

(Eject): The CD eject side of this

button will eject a disc or discs, if you have multiple
discs loaded. To eject a disc or discs from the disc
player, perform one of the following steps:
D Press and release the CD eject side of the LOAD CD

button to eject the disc that is currently playing, or

D to eject all of the discs, press the CD eject side of the

LOAD CD button for two seconds, you will hear a
beep, and the light will flash to let you know when a
disc is being ejected.

When the CD eject side of the LOAD CD button is
pressed, the receiver will eject the disc and REMOVE
CD will be displayed. You can now remove the disc.
If the disc is not removed, after 25 seconds, the disc
will be automatically pulled back into the receiver.

If you try to push the disc back into the receiver, before
the 25 second time period is complete, the receiver will
sense an error and will try to eject the disc several times
before stopping.

Do not repeatedly press the CD eject side of the LOAD
CD eject button to eject a disc after you have tried to
push it in manually. The receiver’s 25

-

second eject

timer will reset at each press of eject, which will cause
the receiver to not eject the disc until the 25

-

second time

period has elapsed.

Once the player stops and the disc is ejected, remove the
disc. After removing the disc, press the PWR knob off and
then on again. This will clear the disc

-

sensing feature and

enable discs to be loaded into the player again.

<<

REV (Reverse): Press and hold this button to

reverse quickly within a track. You will hear sound at a
reduced volume. Release it to play the passage. The
display will show elapsed time.

FWD

>>

(Forward): Press and hold this button to

advance quickly within a track. You will hear sound at a
reduced volume. Release it to play the passage. The
display will show elapsed time.