beautypg.com

Reducing speed while using cruise control, Passing another vehicle while using cruise control, Using cruise control on hills – GMC 2002 Savana User Manual

Page 111: Ending cruise control, Erasing speed memory

background image

2-40

Reducing Speed While Using Cruise Control

D Press in the button at the end of the lever until you

reach the lower speed you want, then release it.

D To slow down in very small amounts, press the

button at the end of the lever briefly. Each time you
do this, you’ll go about 1 mph (1.6 km/h) slower.

Passing Another Vehicle While Using Cruise Control

Use the accelerator pedal to increase your speed. When
you take your foot off the pedal, your vehicle will slow
down to the cruise control speed you set earlier.

Using Cruise Control on Hills

How well your cruise control will work on hills depends
upon your speed, load and the steepness of the hills.
When going up steep hills, you may have to step on the
accelerator pedal to maintain your speed. When going
downhill, you may have to brake or shift to a lower gear
to keep your speed down. Of course, applying the brake
takes you out of cruise control. Many drivers find this to
be too much trouble and don’t use cruise control on
steep hills.

Ending Cruise Control

There are two ways to turn off the cruise control:
D Step lightly on the brake pedal; or
D move the cruise switch to off.

Erasing Speed Memory

When you turn off the cruise control or the ignition,
your cruise control set speed memory is erased.