Turn signal/multifunction lever, Turn and lane-change signals, Turn signal/multifunction – GMC 2006 Sierra User Manual
Page 185: Lever

To tilt the wheel, hold the steering wheel and pull the
lever. Then move the steering wheel to a comfortable
position and release the lever to lock the wheel in place.
Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
•
G
Turn and Lane Change Signals. See Turn and
Lane-Change Signals on page 3-7.
•
53
Headlamp High/Low-Beam Changer. See
Headlamp High/Low-Beam Changer on page 3-8.
•
Flash-to-Pass. See Flash-to-Pass on page 3-9.
•
N
Windshield Wipers. See Windshield Wipers on
page 3-9.
•
L
Windshield Washer. See Windshield Washer
on page 3-10.
•
I
Cruise Control. See Cruise Control on
page 3-10.
For information on the headlamps, see Headlamps on
page 3-14.
Turn and Lane-Change Signals
The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will return
automatically.
To signal a lane change, just raise or lower the lever until
the arrow starts to flash. Hold it there until you complete
your lane change. The lever will return by itself when you
release it.
3-7