GMC 2007 Sierra - Manual (Page 539)

Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To replace one of these bulbs, do the following:
1. Open the tailgate. Tailgate on page 127
for more information.
2. Remove the two
rear lamp assembly
screws near the
tailgate latch
and pull out the
lamp assembly.
3. Determine which of the following taillamp
assembly applies to your vehicle.
4. Press the release tab, if the vehicle has one,
and turn the bulb socket counterclockwise to
remove it from the taillamp assembly.
5. Pull the old bulb straight out from the socket.
6. Press a new bulb into the socket and turn
the socket clockwise into the taillamp
assembly.
7. Reinstall the taillamp assembly.
A. Stoplamp/Taillamp
B. Turn Signal
C. Back-up Lamp
539