GMC 2012 Canyon - Manual (Page 166)

Black plate (24,1) GMC Canyon Owner Manual - 2012
7-24 Infotainment System
To hear all of the numbers
recognized by the system, say
“Verify” at any time.
1. Press and release
g
.
2. Say “Digit Dial.”
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say “Dial.”
Once connected, the person called
will be heard through the audio
speakers.
Using the “Re‐dial” Command
1. Press and release
g
.
2. After the tone, say “Re‐dial.”
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle. Press
and release
g
to answer the call.
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
. Press and release
g
to answer
an incoming call when another
call is active. The original call is
placed on hold.
. Press and release
g
again to
return to the original call.
. To ignore the incoming call,
continue with the original call
with no action.
Three‐Way Calling
Three‐Way Calling must be
supported on the Bluetooth phone
and enabled by the wireless service
carrier to work.
1. While on a call press and
release g .
2. Say “Three‐way call.”
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press g to link all the callers
together.
Ending a Call
To end a call:
1. Press and release g .
2. Say “End Call.”