GIN Yeti xtrem - Manual (Page 17)

17
Rescue Installation and compatibility check
Gin Gliders recommend that rescue installation is performed properly by a competent person.
The Yeti is compatible with GIN Yeti rescue parachutes and Gin front containers. Other manufactur-
ers’ rescues may also be used but we cannot guarantee their efficacy—check your rescue manual
for details.
Every first installation of a rescue system into the harness (that means every new combination
of harness and rescue system) must be checked by a qualified paragliding professional for
compatibility. To verify the installation, you must perform a test deployment by sitting in a
simulator.
Rescue parachutes should be repacked at least every 150 days; so installing your rescue in a
new harness may also provide a good opportunity for a repack. After every repack of the rescue
parachute you should also do a compatibility check. Make sure that the rescue parachute can be
released from the rescue container attached to the harness—it must be done by you, the pilot,
sitting in the harness hanging from a simulator.
WARNING: If you are in any doubt
about any aspect of rescue
installation, seek professional
advice.
IMPORTANT: You must perform a test
deployment from a simulator to
verify the installation.