GIN Yeti xtrem - Manual (Page 11)

11
Components of the Yeti
Manual ‘pass through’ buckles
The Yeti, Yeti Xtrem and Yeti Convertible are designed with lightweight, multifunction buckles.
The chest buckle is used to both adjust the harness size and connect the chest straps. The leg
buckle on the Yeti and Yeti Convertible allow for easy in and out attachment points while the Yeti
Xtrem is designed as a Step-in harness to allow for maximum weight reduction.
Rescue
The Yeti and Yeti Convertible are equipped with rescue bridle attachment points sewn into the
shoulders for a safer PLF (Parachute Landing Fall) position. Sewn into the right-hand side of the
harness is a bridle tunnel that passes from the riser attachment up to the shoulders. The Yeti
Xtrem has no shoulder attachment points but a rescue can be attached to the main carabiners.
Speed bar
All of the Yeti harnesses are equipped with a Pulley and ring for speedbar routing.
Carabiners
Included with your harness are two 2 Yeti Peguet carabiners. With the Yeti Xtrem you can use
the main carabiners as your attachment point for your rescue.
Yeti Airbag attachment points
On the Yeti and Yeti Convertible there are attachment points for an optional airbag. The airbag
adds lightweight safety and can easily be attached or removed.