Galaxy Audio DHT - Manual (Page 4)

2
+ -
1 2 3 4 5 6
Infrared (IR) W indow.
Antenna A indicator light.
Indicates when Antenna A is active .
Antenna A RF strength indicator.
Antenna B RF strength indicator.
Antenna B indicator light.
Indicates when Antenna B is active.
Audio Signal received indicator.
LCD Screen.
See: System Setup on Page 8.
1
2
3
4
5
6
7
ASC Sync Button.
Press to initiate IR connection between
receiver and transmitter.
System Menu Down Button.
See: System Setup on Page 8.
System Menu Up Button.
See: System Setup on Page 8.
System Setup Button:
See: System Setup on Page 8.
On/Off Switch.
8
9
10
11
12
Antenna Jack B 50 ohm.
XLR Output Jack.
¼" Output Jack.
Mute Threshold Fine Adjustment.
This is set at the factory and usually does not need to be adjusted.
If interference signals are received, this threshold value may be increased
by turning the knob clockwise until the RF signal lamp goes out.
DC Power Input Connector.
Antenna Jack A 50 ohm
1
2
3
4
5
6
DHTR Receiver Features
Front Panel
Rear Panel
Functions of the DHTR Receiver Functions of the DHTR Receiver
11
2 3 4 5 6 7 8 9 1 10 12