Galaxy Audio RM-CDV - Manual (Page 2)

 When repeatedly playing from A to B, the display shows A→B.
IMAGE DISPLAY: Connect the VIDEO OUT jack of the CDMV to the input of a video
monitor using a standard video RCA type cable.
POWER and AUDIO: The CDMV should always be installed in a host device such as the
RM2, which will supply power and stereo line audio outputs.
PLAYING:
 This player accepts 12 cm discs such as CD, CD-R, CD-RW, VCD, DVD, MP3, CD-G
disks as well as MP3 files from USB and SD / SDHC media. This unit does not accept
CD-ROM / CD-I / CDV or computer CDs.
 This player will accept these formats: CD, MP3, VCD, DVD, JPG, CD-G, WMA and
MPG.
 VCD, DVD, JPG, MPG and CD-G media will display on a video monitor connected to the
VID OUT jack.
 Insert a disc into the slot with the playback side down. Playback starts automatically.
Track number and playing time will be displayed.
 To pause playback, press PLAY/PAUSE or press on the remote control,
 Press REV, F.WD, or on the remote control, to select next or previous
track number. CD player will continue playback while displaying selected tracks.
 To stop playback, press STOP or press once on the remote control.
 Press FB, FF or on the remote control, to activate fast forward or reverse until
desired section is located.
A video monitor must be connected to the VID OUT jack, to access the on-screen menu,
to play VCD, DVD, CD-G, MPG and JGP formats.
 For instructions pertaining to the video monitor itself, please refer to the manual
provided with that product.
 A video monitor must be connected in order to operate the following functions on the
remote control:
Note:
 When inserting or removing a disk from the CD slot, please allow the CDMV to insert
and return the disc automatically. Damage may result from pushing in or pulling out the
disk by hand.
SD / SDHC Card Slot
DIS PBC
ZOOM
SET
GOTO
TITLE SETUP SLOW AUDIO
SUBTITLE
PLAY/
PAUSE