I. choosing the right connections, Connection to a tv with an y/c (s-video) socket, Connection to a tv with a video (cvbs) socket – Philips CDI220/80P User Manual
Page 10: Antenna connection, Installation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION
I. CHOOSING THE RIGHT CONNECTIONS
Most of today's TV receivers have several picture input
connections. In order of picture quality, these are;
- S-Video (or Y/C);
- Video (CVBS);
- Antenna in.
Depending on the version of your player it is advised to connect
it to the TV input with the highest quality picture.
NOTE
- Please refer to the instructions that come with the TV set for
selection of the correct input.
19 Video output (CV'BS).
20 Y/C (S-video) output.
23 TV antenna input.
2. CONNECTION TO A TV WITH AN Y/C (S-VIDEO) SOCKET
Just connect the corresponding connectors with a matching Y/C
cable.
' As this Y/C cable does not connect the audio, the audio has
to be connected separately.
NOTE
■ Please refer to the instructions that came with the TV set for
selection of the correct input.
Y/C (S-VIDEO)
Y/C (S-VlDEO) CABLE.
aaiZi
3. CONNECTION TO A TV WITH A VIDEO (CVBS) SOCKET
Connect the corresponding connectors with a matching video
cable.
This cable does not connect the audio, and has to be
connected separately.
NOTE
Please refer to the instructions that come with the TV set for
selection of the correct input.
4. ANTENNA CONNECTION
Connect the player to the TV anteima input, using a matching
cable.
If you already have a VCR (or antenna or cable) connected to
the TV antenna input and your CD-i player has an antenna
input, connect the CD-i player between the VCR (or antenna
or cable) antenna output and the TV antenna input, you may
also use an optional external switchbox, if desired.
Your CD-i player sends pictures and sound to your TV on the
channel number indicated on the rear or on the channel
selector position (21) at the rear. This signal is sent through
the coaxial cable.
To operate the player with your TV, set your TV to the same
channel.
If your CD-i player has a chaimel selector (21), to located at the
rear, you can avoid local interference by selecting to a different
channel.
^____
....;
VHP---------
fai
75 Q
(ANTENNA or CABLE INPUT
or VCR OUTPUT) __________
-------------------------------- aSDEI—'
RF COAXIAL CABLE
NOTE
- The sound sent through the RF output to your T\^ is tnotio
only.
- Please refer to the instructions that come with the TV set for
selection of the correct input.
- 1 0 -