Basic operation, Search menu operation – Philips 14PT4525/V7 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION
SEARCH MENU OPERATION
Press ‘MENU’ button on the TV set or on the remote
control to select the Search menu. Shown as below:
SEARCH
COLOR SYSTEM
AUTO
SOUND SYSTEM
B/G
SKIP
OFF
BAND
VHF-H
AUTO SEARCH
SEARCH
FINETUN.
SELECT ADJUST
H
exit
AUTO SEARCH OPERATION
1. Press ‘CH+/CH-’ button to select AUTO SEARCH item.
2. Press ‘VOL+/VOL-’ button to begin searching.After searching
all wave band, auto search stop. In the course of the auto
Searching,press
‘MENU’
button
to
stop
searching.After
auto search finished, the unit returns to the normal reception status.
Note:
The unit will automatically search all VHF-UVHF-H, UHF band and supplementary channel.
After searching finished, all fine tuned programs will be stored automatically.
When it is auto search, the amount of stored programs can be 200 (program number 0-199).
lb
MANUAL SEARCH OPERATION
1. Press ‘CH+/CH-’ button to select SEARCH item.
2. Press ‘VOL+/VOL-’ button right or left to search the TV program you want. When find a
program, searching stops. In the course of the manual searching, press ‘ MENU ’ button to stop
searching.
FINE TUNE OPERATION (only in case of poor reception)
1. Press ‘CH+/CH-’ button to select FINETUN. Item.
2. Press ‘VOL+/VOL-’ button right or left to adjust the picture and sound.
BAND SETTING
1. Press ‘CH+/CH-’ button to select BAND item.
2. Press ‘VOL+AfOL-’ button to selectVHF-L,VHF-H, UHF.
COLOUR SYSTEM SETTING
1. Press ‘CH+/CH-’ button to select COLOR SYSTEM item.
2. Press ‘VOL+AfOL-’ button to select AUTO, PAL, NTSC3.58, NTSC4.43, SECAM.
SOUND SYSTEM SETTING
1. Press ‘CH+/CH-’ button to select SOUND SYSTEM item.
2. Press ‘VOL+/VOL-’ button to select D/K, M, B/G, I.
PROGRAM SELECTION
1. Press ‘CH+/CH-’ button to select PROGRAM item.
2. Press ‘VOL+/VOL-’ button or numeric keys to select Program Number.
SKIP SETTING
1. Press ‘CH+/CH-’ button to select SKIP item.
2. Press ‘VOL+/VOL-’ button to select ‘On’ (channel skipped) or ‘Off’ (channel not skipped).
Note:
When Skip item is set to ‘On’ ,this position will be skipped while you use ‘CH+/CH-’
button to scan the stored channels.You can still use numeric keys to select the skipped
channels.
I I