Philips AZ 1203 - Manual (Page 11)

CD PLAYER
Programming track numbers
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
A maximum of 20 tracks can be stored in the memory.
1 Select the desired track with SEARCH i < m or w>r.
2 As soon as the number of the desired track is displayed, press
the PROGRAM button to store the track in the memory.
-* PROGRfliui appears in the display and the number of the
stored track is shown. Then p r o g lights up briefly.
3 Select and store all desired tracks in this way.
You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
— The display shows all stored track numbers in sequence.
If you try to store more than 20 tracks the display shows P U L L .
If you press PROGRAM and there is no track selected, the display
shows no 5 E L .
^
C l i l I
I U L L
OP ccf
¿SBa -il— 1_
Playing the program
If you have selected the tracks in the stop position, press
PLAY-PAUSE >00.
If you have selected the tracks during CD play, first press STOP □,
then press PLAY-PAUSE >00.
I '^1 PROGRAM
JP C3 C3
U - I - I L
Erasing the program when CD playback is stopped
From the stop position, press STOP □.
— no p r o g lights up briefly, program disappears and your
program is erased.
Note: The program will also be erased if you
- interrupt the power supply,
- open the CD compartment, or
-move the POWER sterfoTUNER orTAPE.
11