beautypg.com

Cassette – Philips AZ 8101 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

CASSETTE

RECORDING

• Press EJECT ■ to open the cassette holder.
• Insert the cassette (fig. 6).

For recording you must use a NORMAL cassette
(ferric oxide, lEC type I) on which the tabs (fig. 7) are

not broken out.

At the very beginning of the tape, no recording will

take place during the first 7 seconds when the
transparent leader tape passes the recorder heads.

When monitoring during recording, adjust the

sound with the controls VOLUME ©, GRAPHIC

EQUALIZER © and DBS bass button ®. These

controls do not affect the recording.

Mono recording from the MICROPHONE ®

• Set ON/OFF MODE selector © to

TAPE.

• Set VOLUME control © to zero. (Dunng micrc

phone recordings, monitoring is not possible.)

• Now start recording by pressing RECORD •; i

doing so. PLAY ► is automatically pressed too.

• For brief interruptions, press PAUSE II. To resta
recording, press this button once more.
• To stop recording, press STOP ■. The set is the

switched off.

PLAYBACK

Recordfng from the CD-player

• Set ON/OFF MODE selector © to

CD

(Compact

Disc).

• Start recording by pressing RECORD •; in doing
so, PLAY ► is pressed too.

It's not necessary to start the CD-player separately:
if you press RECORD •, the CD-player starts

automatically (Synchro-Start):

- if the CD-player is in position STOP, recording will

start from the beginning of the disc (or from the
beginning of the stored selection);

- if the CD-player is in position PAUSE, recording will

start from this very position;

-

in position INTROSCAN the CD-player will first

return to the beginning of that track and then
recording will start.

• For brief interruptions, press PAUSE II. To restart
recording, press this button once more.
• To stop recording, press STOP ■.

To switch off the set, place ON/OFF MODE

selector © to

TAPE - POWER OFF.

• Set ON/OFF MODE selector © to

TAPE.

• Press EJECT ■ and Insert a recorded cassett

(fig. 6).

• Press PLAY ► and playback wll start.

• Adjust the sound with the controls VOLUME (T

GRAPHIC EQUAUZER © and DBB bass button g

• To stop playback, press STOP ■. The set is the
switched off.

COMPACT CASSETTES

For

recording,

use only NORMAL cassettes (fern

oxide, lEC type I).
For

playback,

any cassette type can be inserted.

COPYRIGHT

Recording is permissible insofar as copyright c
other rights of third parties are not infringed.

Recordfng from the radfo

• Set ON/OFF MODE selector © to

RADIO.

• In case of FM radio recordings, set BAND selector
© to the desired position (FM MONO or FM

STEREO).

• Now start recording by pressing RECORD •; in

doing so. PLAY ► is automatically pressed too.
• For brief interruptions, press PAUSE II. To restart

recording, press this button once more.

• To stop recording, press STOP ■.

To switch off the set, place ON/OFF MODE

selector © to

TAPE - POWER OFF.

Fx>r U K. only.

Recording and Playback o! malenal may requir

consent See Copyright Act 1956 and The Performer’s Protection Act

1958 to 1972.

FAST WINDING AND REWINDING

Press fast forward wind F.FWD ►► or REWIND

4

button. To stop fast winding, press STOP button ■

SAFEGUARDING AGAINST ERASURE

Keep the cassette side to be safeguarded in front c

you (fig. 7) and break out the left tab Now, recordini

on this side is no longer possible.

You can render this safeguard ineffective by coverint

the aperture with a piece of adhesive tape.

This manual is related to the following products: