Philips AZ 8101 - Manual (Page 7)

iOMPACT DISC
io to the NEXT M or PREVIOUS M title____________
he NEXT/PREVIOUS buttons are operative during
LAY and INTROSCAN.
I NEXT - go to the next track (title)
luring playback, you can jump to the next title by
ressing NEXT W, once. If you want to skip more than
ne track, then press NEXT W more than once until the
jsplay ® shows the desired track number.
I PREVIOUS - go to the previous track (title)
you want to repeat a previous title, press PREVIOUS
I once or more than once until the display © shows
te required track number.
iEARCH ______________________________________
he SEARCH-buttons are operative only during
'LAY.
> Keep SEARCH t>t> (forward) or
jressed. The disc is then played at high speed,
lowever, the sound is still recognizable.
» When releasing the button, the disc is played in the
tormal way from this passage.
'fay the beginning of all tracks INTROSCAN * ••
he INTROSCAN function can be switched on both
torn the STOP and the PLAY position.
> Press INTROSCAN; the INTROSCAN indicator
^
ii) lights up. Now the first few seconds of each track
)n the disc are played, always from the 1=' track
•lumber.
•• If you press NEXT W or PREVIOUS M, the INTRO­
SCAN function remains operative and the beginning
if the next W or previous M track is played again.
»The INTROSCAN function is defeated and the
NTROSCAN indicator -St goes out:
' if the end of the disc is reached;
' if you press STOP □;
- if you press PLAYt>. Now, the disc is played in the
normal way from this track number.
PROGRAMMING TRACK NUMBERS_________________
Instead of playing a complete disc, you may select
a number of tracks and store these in the memory in
the desired sequence. When playing, you will hear
the stored titles in the selected sequence.
Manual selecting
• Programme in the STOP position.
• Press TRACK -i- and — until the display ©shows
the required track number.
• Store this track by pressing STORE.
Storing during INTROSCAN
• Press INTROSCAN to play the first few seconds of
each track.
• Press STORE as soon as you recognize a desired
title.
Storing during PLAY
• Press PLAY O.
• Press STORE if you want to store the running title.
-When pressing STORE the display will show the
character 'P', indicating that the track has been
stored.
- Store all desired titles in the required sequence. At
most 24 tracks can be stored in the memory. You
may store each track more than once. When the
memory is full, the character F (FULL) appears in the
display ©
-When pressing DISPLAY, the display will show in
sequence all stored track numbers.
-You can simply erase the whole memory by
pressing CLEAR.
The contents of the memory are also erased;
- if you press CD OPEN ©
- if you move the ON/OFF MODE selector ©;
- if the batteries get exhausted or if the power
supply is interrupted in another way.
- If the display ©shows the ERROR indicator you
gave an illogical operating command. The CD-player
remains in the PLAY mode.
How to play the stored selection
• If necessary, first press STOP □.
• Press PLAY n> and your selection is played.