beautypg.com

Operation programming – Philips CD 605 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

OPERATION

PROGRAMMING

INTERRUPTING PLAY (PAUSE)

• Press PAUSE.
- starts to flash.
• Press PAUSE again to restart.

REPEATING A PASSAGE (A-B)

• During play press A-B at the required starling

point.

- A lights up.

• Press A-B again at the required stopping point.

- -B lights up.
- The passage between points A and B will now be

replayed continuously.

• Press A-B again if you wish to return to normal play.

To find the starting and stopping points quickly, you

can use the M> keys.

REPEATING A CD (REPEAT)

• Press REPEAT before or during play.

- REPEAT lights up and the CD will now be repealed

again and again.

• Press REPEAT again to stop the REPEAT function.

STOPPING PLAY (STOP/CM or OPEN/CLOSE)

• Press STOP/CM if you merely wish to stop.
• Press OPEN/CLOSE if you wish to stop and take

out the CD.

You can store 20 tracks from each CD in any required

sequence in a programme. If you exceed the

maximum of 20 tracks. ERROR lights up.
Index numbers cannot be stored.

STORING A PROGRAMME

(NEXT, PREVIOUS and PROGRAM)_____________

• Close the CD compartment by pressing OPEN/

CLOSE.

- The display shows the number of tracks and the

playing time of the CD.

• Press NEXT or PREVIOUS until the first track

number you wish to programme appears under

TRACK.

• Now press PROGRAM within 8 seconds.

- After the number a P(for Programme) will appear;

the number has now been stored in the player’s

memory.

• Select the other track numbers required and store

each track by pressing PROGRAM.

- The number indicator always shows which num­

bers have been stored.

CHECKING THE PROGRAMME (PROGRAM)

• Press PROGRAM before, during or after program­

med play.

- REVIEW lights up and all the track numbers appear

in the programmed sequence on the display.

PLAYING THE PROGRAMME (PLAY/REPLAY)

• Press PLAY/REPLAY.

-

Play begins with the first number of the pro­

gramme.

All keys can be used during programmed play

(except RANDOM and A-B). Searching for a pas­

sage is limited to within the track being played.

ERASING A PROGRAMME
(STOP/CM or OPEN/CLOSE)

Press STOP/CM twice, or, if the CD has already

stopped, just once: you can also press OPEN/
CLOSE straight away.

The programme has now been erased.

This manual is related to the following products: