Operation – Philips CD 605 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
FRONT OF PLAYER (Fig. 2)
REMOTE CONTROL (CD 615 only)
1 ON/OFF
Switching on and off.
2 DISPLAY
Informs you about the functioning of the player.
3 IR REMOTE (CD 61S only)
Receives the signals from the remote control.
4 STOP/CM
- Stopping play.
- Erasing a programme (CM = Clear Memory).
5 PREVIOUS and NEXT
- Selecting another track during play.
- Selecting a track to start play with.
- Selecting tracks when compiling a programme.
6 PLAY/REPLAY
- Starting play.
- Returning to the beginning of a track.
7 OPEN/CLOSE
Opening and closing the CD compartment.
8 RANDOM
Playing in random order.
9 REPEAT
Repeating play.
10A-B
Setting the starting and stopping point of a
passage to be repeated.
11
Fast search for a passage.
12 PAUSE
Interrupting play.
13 PHONES
For connection of headphones.
14VOL{ume)
For adjusting the volume when listening with
headphones.
15 PROGRAM
- Storing tracks in a programme.
- Erasing tracks from a programme.
- Checking the programme.
<] TRACK D = PREVIOUS and NEXT.
O SEARCH D =
O INDEX D;
selecting another indexnumber during play;
selecting an index number to start play with.
Use the 1-0 digit keys, instead of PREVIOUS and
NEXT, for d/recf selection of:
another track during play;
a track to start play with;
tracks when compiling a programme.
Two-figure numbers must be entered within 2
seconds!
DISPLAY (Fig. 3)
------ Lights up when you switch the player on.
8
- Lights up when an 8-cm CD is inserted.
ipg=c>-Lights up when a 12-cm CD is inserted.
REVIEW - Ughts up when you check a programme.
TRACK
- Indicates the track number being played.
- Shows how many tracks there are on the CD.
REPEAT - Lights up when the entire CD or a
programme is repeated.
A-B - Ughts up when a passage is repeated.
i>- Ughts during play; flashes when play is interrup
ted (PAUSE).
TIME - Indicates:
- the elapsed playing time of the track being played:
- the total playing time of the CD.
1-20 track number Indicator - Shows the number of
tracks on the CD; -F 20 lights up when there are more
than 20 tracks on the CD.
ERROR - Ughts up if you:
- make an error in operating the player;
- try to start play when the CD is inserted with the
printed side facing down, is not inserted at all or is
damaged.
RANDOM - Ughts up when the tracks are played in
random order.
(1(0 - Ughts up when the player receives a command
from the remote control.
SWITCHING ON AND OFF (ON/OFF)____________
• Press ON/OFF to switch the player on.
• Press ON/OFF again to switch the player off.