Philips CD 840 - Manual (Page 7)

SELECTING ANOTHER TRACK DURING PLAY
C1-0’, NEXTor PREVIOUS)
• Put the player in the direct play mode using PROGRAM/PLAY.
> PLAY iights up above DiRECT.
• Key in the desired number (numbers consisting of two figures
must be keyed in within 2 seconds) or press NEXT or
PREVIOUS until the number appears under TRACK.
> The music stops and a moment later the selected track begins
to play.
DISC END will light up if you press NEXT while playing the last
track.
DISCBEGINwWl light up if you press PREVIOUS while playing the
first track.
WRONG TRACK will light up if you select a non-existent number
with the ’1-0’ digit buttons.__________________________________________________
SELECTING ANOTHER INDEX NUMBER DURING PLAY
(O INDEX O)
importanti
Index numbers are not Indicated specifically on the display. If the
parts of a track have index numbers, this will be specified in the
track list in the disc holder.
• Press INDEX D or <3 INDEX until the required index number
appears under INDEX.
> The music stops and a moment later the selected index number
begins to play.
If the index number selected does not exist, play will start again at
the beginning of the current index number._____________________________________
SEARCHING FOR A PARTICULAR PASSAGE DURING PLAY
(
• Hold
• Hold CURSOR » down to search forwards to the end.
As soon as the button is released play restarts at once. As soon
as you reach the beginning of the first track, a ’P’appears on the
display: then, following a two-second pause, D/SCSEG/A/lights
up and play will resume there as soon as you release the button.
If you reach the end of the last track, D/SCEWD will light up. If you
then release the button, play will resume afew seconds before the
end of the disc.
At this search speed sound is audible.________________________________________
FAST SEARCH FOR A PASSAGE
(FAST and
• Press FAST.
> FASriights up.
• Now press within 2 seconds.
• Hold the button down; if you release the button briefly, sear­
ching will resume at the lowest speed.
At this search speed no sound is audible.______________________________________
SCANNING A DISC (SCAN)
• Press SCAN before or during play.
> SCANNING lights up.
> If the tray was open, it will now close.
> The first 20 seconds of each track are played in turn.
• When the player reaches a track which you wish to hear in full,
press PLAY/REPLAY.
• Press SCAN again to end the scanning.
> SCANNING then goes out and play continues as normal.
During scanning the digit buttons ’1-0’, NEXT and PREVIOUS can
be used.
BEGINNING WITH A PARTICULAR TRACK NUMBER
With the digit buttons ’1-0’
• Put the player in the direct play mode using PROGRAM/PLAY.
> PLAY lights up above DIRECT.
• Key in the required number (numbers consisting of two figures
must be keyed in within 2seconds).
> The number appears under TRACK.
> On the number indicator the selected track number and those
following it light up.
> PMYlights up and play starts from the selected track.
WRONG TRACK lights up if you select a non-existent number.
With NEXT or PREViOUS
• Press NEXT or PREVIOUS until the required number appears
underTRACK. If you wish to begin with the highest number, you
must still press PREVIOUS once.
• Press PLAY/REPLAY within 7 seconds.
> On the number indicator the selected track number and those
following it light up.
> PMYlights up and play starts from the selected track.__________________________
BEGINNING WITH A PARTICULAR INDEX NUMBER
(O INDEX [> and PLAY/REPLAY)
Important!
Before selecting an index number you must first select a track
number. If you select the track number with the digit buttons ’1-0’,
then no more than 2 seconds may elapse between the pressing
of the different buttons. If you select the track number with NEXT
or PREVIOUS, then no more than /seconds may elapse between
the pressing of the different buttons.
• Select the track number you wish to start with.
> Then press INDEX OorO INDEXuntilthedesiredindexnumber
appears on the display.
• Press PLAY/REPLAY.
> PLA/lights up and play starts from the selected index number.
If you select a non-existent index number, playback starts with the
selected track. * •
PLAYING THE DISC IN RANDOM ORDER (RANDOM)
• Before or during play press RANDOM.
> The RANDOM indication lights up.
> If the tray was open, it will now close.
> All the tracks on the disc are now played in a sequence to be
determined by the player.
> Press RANDOM again if you wish to return to normal play.
If during play you press PREVIOUS you will return to a track which
has already been played. If you press NEXT you are selecting any
one ofthe following tracks. If you press PREVIOUS during the first
track or NEXT during the last track, ERROR will light up.
By pressing REPEAT you can repeat random-order play. The
player then always begins with the same track, but otherwise
changes the sequence every time the disc is repeated.
The digit buttons ’1-0’ cannot be used during random-order play.
If you only wish to hear the firsHlTsfeconds:
• Press FAST and then SCAN.
> FAST SCA/V Iights up.
> The first 10 seconds of each track are played in turn.
• When the player reaches a track which you wish to hear in full,
press PLAY/REPLAY.
• Press SCAN again to end the scanningr
> FAST SCAN then goes out and play continues as normal.