Philips VSS9451 - Manual (Page 4)

(|
b
)
instructions for use
m
3
(Q_
55'
3"
PRECAUTIONS INSTALLATION
In order to prevent any fatal accidents caused by misoperation
or mishandling of the monitor, be fully aware of all the
following precautions:
• Only use the power source specified on the rating label
located on the of the cabinet.
• When not using this unit for a long period of time, or when
cleaning it, be sure to disconnect the mains plug from the
mains supply.
• Do not allow anything to rest on the mains lead.
• Do not locate this unit where people will tread on the cord.
• Do not overload wall sockets or mains leads as this may
result in fire or electric shock.
• Avoid using this unit under the following conditions;
- in extremely hot, cold or humid places;
- in dusty places;
- near appliances generating strong magnetic fields;
- in places subject to direct sunlight;
- in badly ventilated places.
• Do not cover the ventilation slots while in operation as this
could obstruct the required ventilation.
• When dust accumulates on the screen surface, clean with a
soft cloth.
• Do not use alcohol or ammonia based liquid to clean the
monitor.
If necessary, clean with a slightly damp cloth. Disconnect
the monitor from the mains supply before cleaning.
• Unplug this unit from the wall socket and refer servicing to
qualified service personnel under the following conditions:
- when the mains lead is frayed or the plug is damaged;
- if liquid has been spilled into the unit;
- if the unit does not operate normally following the
operating instructions;
- if the unit has been dropped or the cabinet has been
damaged;
- when the unit exhibits a distinct change in performance.
• Do not attempt to service this unit yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Always refer servicing to qualified service
personnel.
WARNINGS
- To prevent fire or shock hazard, do not expose this
monitor to rain or moisture.
- Dangerous high voltages are present inside the unit. Do
not remove the back cover of the cabinet.
- When servicing the monitor, contact qualified service
personnel. Never try to service it yourself.
- Improper operations, in particular alteration of high
voltage or changing the type of tube may result in x-ray
emission of considerable dose.
A unit altered in such a way no longer meets the
standards of certification, and must therefore no longer
be operated.
' Before installing this monitor, please refer to the instructions
for use of your camera or VCR to make sure if
these equipments require any change of setting.
POSITIONING/VENTILATION
When positioning this equipment ensure that the mains plug
and socket are easily accessible.
Do not place the monitor near a heat source.
To prevent overheating, ensure that the ventilation openings
of the monitor are not covered.
MAINS CONNECTIONS
Before connecting the equipment to the mains of the
building installation, the protective earth lead of the building
must be checked for its proper functioning.
The monitor is supplied with a 2 m. long mains lead
terminated with a 2-pole Europlug with safety earth
connections. In some countries it will be necessary to
replace this plug with one of a locally standard type. The
wiring to the plug must be as follows:
brown - live (in the U.K. marked °L° or coloured red);
blue - neutral (in the U.K. marked °N” or coloured black);
yellow/green - earth (in the U.K. marked “E° or i or coloured
yellow and green).
VIDEO/AUDIO INPUT
Be sure to disconnect the mains lead from the mains socket
before connecting the other equipment.
Also refer to the instructions for use of the equipment to be
connected.