Futaba GY520 - Manual (Page 24)

24
GY520 P
ROGRAMMING
Parameter 6: Data Reset [6 FLASHES]
1. Servo Type Digital 1520μS
2. Gyro Compensation Direction Normal
3. Servo Limits 100% / 100%
4. Flight Mode F3C
5. Gyro Response Standard
PARAMETER DEFAULT SETTING
To perform the Data Reset:
Quickly press and release the button on the gyro. The gyro LED will
begin fl ashing quickly requesting confi rmation of the Data Reset. To
confi rm the Data Reset the gyro button must be quickly pressed and
released 3 times, within 2 seconds. Once the data reset is performed
the gyro will automatically return to the Servo Type Selection [Blue,
1 Flash] parameter.
Exiting Programming Mode:
Once you have completed setting up the parameters simply turn the
receiver power off.
Restores the gyro to the factory default settings. It will be necessary
to reprogram all parameters again before fl ying the model.
Y520 Mnl.indd 24 Y520 Mnl.indd 24 4/7/2009 7:55:06 AM 4/7/2009 7:55:06 AM