Futaba 7UAF, 7UAP - Manual (Page 19)

• FUNCTION AND DATA SETTING
Press the [MODE SELECT] To normal display mode
Activate/inhibit mode setting
Set the mode with the
keys.
+ : Activate
-: Inhibit
Set the CH1 servo direction of operation
Set the flashing display to "+"
or "—" with the
keys.
Held as lonq as the aileron
is at the right.
(Channel 1 side selected.)
Set the direction of operation
keys. with the
+ : Normal direction
— : Reverse direction
CH6 servo direction of operation setting
Held as long as the aileron
is at the left.
Set the direction of operation
with the
keys.
+ : Normal direction
— : Reverse direction
CH1 servo throw setting
Set the flashing display to "%"
with the
keys.
Held as long as the aileron
is at the right.
Set the rate with the
keys.
(When the + and — keys are
pressed simultaneously, 100% is
set.)
CH6 servo throw setting
Held as long as the aileron
is at the left.
Set the rate with the
keys.
(When the + and — keys are
pressed simultaneously, 100% is
set.)
To FLTR
(ON: Activate state)
(INH: Inhibit state)
FLPR
FLAPERON
This is a mixing function which
gives the ailerons a flap function.
The ailerons can be raised and
lowered simultaneously. Aileron
operation is also performed.
• The operating channels are CH1
and CH6.
Ailerons can be rais-
ed and lowered sim-
ultaneously.
*AIL DIFF and FLAPERON can-
not be on simultaneously. The
function set last has priority.
— 17—