Futaba 6J 2.4GHz - Manual (Page 94)

T6J-2.4 GHz Tech Notice
T6J-2.45 GHz Trainer cord-
Instructor’s TX Student’s TX Trainer Cord
6J, 4YF 6J, 4YF FUTM4415
6J, 4YF
14MZ, 12Z, 12FG, 8FG, 10C,
9C, 7C, 6EX, 4EX (72MHz or
2.4 GHz FASST)
14MZ, 12Z, 12FG, 8FG, 10C,
9C, 7C, 6EX, 4EX (72MHz or
2.4 GHz FASST)
6J, 4YF
FUTM4405 (both transmitters
must be on)
If connecting the T6J-2.4 GHz to another T6J-2.4 GHz or other SFHSS/FHSS
transmitter, use the “micro to micro” (MM-TC) trainer cord (FUTM4415). If
connecting the T6J-2.4 GHz to a 72MHz or 2.4 GHz FASST transmitter, use the
“micro to FG” (MM-TC-FG) trainer cord (FUTM4405). This is due to the voltage
difference of the two transmitters and both transmitters need to be turned on.
Never connect the T6J-2.4 GHZ to a transmitter that has the large round (DIN)
connector as it will cause the T6J-2.4 GHz to malfunction.