Futaba 6EX 2.4GHz - Manual (Page 27)

27
specialized digital servos. Examples:
• GY401: Simpler set up. Ideal for learning aerobatics through 3D.
• GY502: Better centering than 401 for more advanced aerobatics. Ideal through Class III competition.
• GY611: Exceptional center. Extremely fast response time. Requires specialized servo.
Gyro mixing function is used for adjusting the gain of the gyro. Select from two different gain settings using a switch on the
transmitter.
To set the GYRO mixing:
1. Plug the gyro’s sensitivity adjustment to channel 5 of the receiver. (not assignable)
2. EPA of channel 5 (see page 12-13) to set 100% both UP and DOWN.
3. Enter the programming mode and use the MODE key to access the “GYRO” function.
4. Push the DATA INPUT lever upward for 0.5 seconds. This will cause the flashing “INH”
display to change to a flashing “ON” display. Now the mixing is on.
5. Push the SELECT key once. This will show the gyro gain setting and flashing “%” symbol on
the display.
Flip the gyro (CH5) switch up and down. This will cause the arrow on the display to point up and down corresponding to the
switch position. Push up or down DATA INPUT lever to set the gyro gains for both switch up and down position. Gyro gain can
be adjust from -100% to +100%.
(Up position)
(Down position)
Relationship
between transmitter set value
and gyro sensitivity
+100%
Transmitter
set value
Gyro
sensitivity
50%
0%
-50%
-100%
100%
50%
0%
50%
100%
A
VCS s
ide
Nor
mal s
ide
Normal mode
60%
AVCS mode
80%
Sensitivity
switch
(CH5)
Example of sensitivity setting with GY401