Clarion DXZ556MP - Manual (Page 8)

10
DXZ556MP
280-8168-00
English 6. REMOTE CONTROL
CR202
5
[SRC] [BND]
[ ]
[ ], [ ]
[MUTE]
[ISR]
[SCN]
[ a ], [ d ]
[DISP]
[RDM]
[RPT]
Inserting the Battery
1 Turn over the remote control unit and slide the cover
in the direction indicated by the arrow in the
illustration.
2 Insert the battery (CR2025) into the insertion guides,
with the printed side (+) facing upwards.
3 Press the battery in the direction indicated by the
arrow so that it slides into the compartment.
4 Replace the cover and slide in until it clicks into place.
Notes:
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or
damage to surrounding materials. Always follow these
safety precautions:
• Use only the designated battery.
• When replacing the battery, insert properly, with +/–
polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
Insertion guide
Signal transmitter
+DXZ556MP-009-ENG 04.12.16, 9:06 AM 10