Chief Manufacturing CM6DH - Manual (Page 4)

CM6DH SERIES Installation Instructions
4
INSTALLATION
Cabinet Considerations
1. Header must not extend beyond top of track.
2. Guide wheel must have free play in toe space.
3. Doors must not exceed 50 lbs (each).
4. Allow ample room for drawers to open past doors, and
for doors to move in front of cabinet, as well as above
floor or carpet.
5. Use of a quality surge protection device is suggested
for mounting on top of cabinet to make electrical
hook-up of the mechanism and lights.
Installing to Cabinet
1. Place mechanism (A) on top of cabinet. (See Figure 1)
2. Align center of track with center of the door opening.
3. Attach using #8 or #10 screws through the holes in track.
4. Attach motor box to the track following instructions in box.
(See Figure 2)