Envirco MAC 10 LE-AC - Manual (Page 18)

MAC 10 LE-AC SERVICE MANUAL
PAGE 7 1
ACLE PARTS PART #
Grommet
63271
Motor 120V 63764-001
Motor 220V 63764-002
Motor 277V 63764-003
Motor Mount Clip 38511-001
Venturi Ring 64115
Blower Wheel 64015
Motor/Blower Assy
120V
24511-001
220V 24511-002
277V 24511-003
Capacitor 61485
Capicitor Boot 60126
Rocker Switch 63739-002
3 spd switch 63775
Foam Pre-filter 62981-038
30/30 Pre filter 64125-001
All filter part numbers are based on the standard Mac 10 sizes (2x4 – 23.63x47.63).
If the unit in question is not this size or the part number includes a “Z” contact the
Optional Accessories:
Fluorescent lighting
Ionizing bar
ULPA Filter (Standard and RSR)
Replacement parts are available through your authorized
Envirco representative. If you cannot locate a representative
in your area, contact Envirco Parts Dept. at:
ENVIRCO
101 McNeill Road
Sanford, NC 27330, U.S.A.
Tel: (919) 775-2201
Tel: (800) 884-0002
Fax: (800) 458-2379
11 MAC 10 LE-AC Replacement Parts List:
A/C intake collar: 20x20 (10” /254mm)
20x20 (12” /304.8mm)
20x20 (14” /355.6mm )
(20X20)
factory for replacement filter information.
STANDARD FILTERS PART NUMBERS
69600S-001HAPXX FILTER - HEPA 2X4 9" FRAME
69600S-001UAPXX FILTER - ULPA 2X4 9" FRAME
WELDED RSR GEL SEAL
69601-001H FILTER - HEPA 21X45X3.5 GEL SEAL
69601-001U FILTER - ULPA 21X45X3.5 GEL SEAL
(20X20)