Emerson Radio ES17 - Manual (Page 13)

12
To repeat a single track, press the
REPEAT/PRESET UP button ❶
once; “REPEAT” will blink in the
display. Press the TUNING/SKIP/
Search
❷ or ❸ button
to select the specific track that you
wish to repeat. When the desired
track number appears in the
display, press the PLAY/PAUSE
(Š ) button ❹ to begin playback.
The specific track you selected
will be repeated continuously.
2
4
1
3
1
To cancel Repeat Playback,
press the REPEAT/PRESET UP
button until “REPEAT” disappears
from the display.
3
To repeat all of the tracks on a
disc continuously, press the
REPEAT/PRESET UP button ❶
twice; “REPEAT” will light solid in
the display. Press the
PLAY/PAUSE (Š ) button ❷ to
begin all tracks repeating.
2
1
2
REPEAT PLAYBACK
Press the CD Function button.
1
Press the MEMORY/CLOCK ADJ
button; “P-01” (program number),
“01” (track number) will appear
and “MEMORY” will blink in the
display.
3
Press the OPEN/CLOSE button ❶
and insert a CD with the label side
facing up. Press the STOP/BAND
(■) button ❷ to stop the auto-play
feature.
1
2
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once. To perform programmed playback, follow the steps below.
Notes:
•
You cannot program a disc while it is playing. If the disc is playing press the STOP/BAND (■) button first
to stop playback before you perform the programming procedure.
• You can only program tracks from a single disc. You cannot program tracks from two different discs in
the same program sequence.
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
OPERATING INSTRUCTIONS (CONTINUED)
ES17.O/M.QXD 5/12/03 2:51 PM Page 12