Emerson Radio EK215 - Manual (Page 10)

9
CASSETTE TAPE OPERATION (CONTINUED)
Insert a prerecorded tape into
Deck 1 and a blank cassette tape
into Deck 2. Slide the FUNCTION
switch to the TAPE position.
1
For higher quality dubbing, slide
the HIGH-SPEED DUBBING
switch to the OFF (Normal Speed
Dubbing) position.
3
For high speed dubbing, slide the
HIGH-SPEED DUBBING switch
to the ON (High Speed Dubbing)
position.
2
Press the PAUSE ( ) button ❶
then the RECORD ( ) button ❷
on Deck 2; the PLAY (➛) button
will automatically depress.
2 1
4
Press the PLAY (➛) button ❶ on Deck 1 and the PAUSE ( ) button ❷ on
Deck 2 will release automatically and the dubbing will begin. When
dubbing, the shorter tape will stop first and the other will continue
running until it reaches the end or is stopped manually.
2 1
5
NOTES:
• When dubbing at high speed, a chattering sound may be heard. To avoid this, set the MASTER
VOLUME control to the minimum position while the tape is dubbing at high speed. DO NOT slide the
HIGH SPEED DUBBING switch while dubbing is in progress.
• For best results, use normal bias cassette tapes when recording.
DUBBING A CASSETTE TAPE AT NORMAL OR HIGH SPEED
EK215 KARAOKE O/M.QXD 8/15/02 3:43 PM Page 9