EDCO BB14E - Manual (Page 9)

Page 9
E-BB14E&BB14G-I-0714
E-SPTS-I-0809
800-638-3326 • edcoinc.com • [email protected]
EQUIPMENT DEVELOPMENT CO., INC.
When Dry Cutting:
• Drain and fl ush any water or debris in the tray and
dispose of properly.
On Gasoline models:
•
To disengage water pump loosen the black knob and
push top of water pump to the right with constant
pressure and tighten black knob. (Figures 9 & 12)
On Electric Models:
•
Unplug the submersible pump from the water pump
outlet on the motor.
Be careful when draining water
from tray and dispose of waste
away from work area.
Draining the water directly to the ground will
cause a potentially serious working hazard includ-
ing, but not limited to, risk from electric shock if
using an electric motor.
Figure 14 (BB14E)
Blade
Cover
Lock
Knob
Figure 12
• To disengage water pump loosen the black knob and
push top of water pump to the right with constant
pressure and tighten black knob (Figures 9 & 12).
DO NOT LET THE
WATER PUMP RUN DRY.
Figure 13
Blank
On Gasoline models only On Gasoline models only
Black knob Black knob