Ecler White Paper - Networking with EclerNet Manager - Manual (Page 6)

White Paper – Networking with EclerNet Manager
Document: AS Version: 1.0 Date: Page 6 of 12
Then, we must be sure as well that the entire path among devices in the network allows for
Unicast/Multicast transfer. In some switches it may be also necessary to disable some settings
related to the number of multicast packets allowed to get through. The labelling used for these
settings is varied among brands, but they are often referred as “broadcast storm”, IGMP,
“802.1p” or similar terms.
Some examples over 3Com switches:
Perhaps the settings to be tweaked are referred as IGMP...: