White paper – networking with eclernet manager – Ecler White Paper - Networking with EclerNet Manager User Manual
Page 10
White Paper – Networking with EclerNet Manager
Document: AS
Version: 1.0
Date:
Page 10 of 12
Put the proper device’s network configuration (IP address and mask of the remote
MIMO88):
Note: In this scenario, the entered Gateway IP must be the same as the one assigned to the
remote DSL router at the other side of the connection, the router the MIMO88 is connected
to. Remember once again that the router must allow for UDP transit using the selected port
(2210). See on the appendix a small list of ports and protocols.
Do a “connect”: