CatEye Q3A - Manual (Page 48)

ENG-47
Data mode
Continue
5.
Once sending data is completed, “SEND FILE END” ap-
pears. Press the SSS button and return to the data mode
“PC LINK”.
To the mode top :
SSS
Press the 6.
MENU button repeatedly to switch to another
mode.
To switch modes :
MENU
Data to be sent from this unit to your PC
The data to be sent to your PC are as follows.
File number •
Date/time of file creation (date/time when the measurement started) •
Measured values of the speed, heart rate, cadence, trip distance, elapsed time, •
and sea level altitude, at the record intervals specified
Lap data (lap number, average lap speed, average lap heart rate, Average lap
•
cadence, maximum lap speed, maximum lap heart rate, maximum lap cadence,
lap time, split time, and lap distance), Time in the heart rate zone (over / within
the range / under)
The wristwatch has a limited memory capacity. It is recommended to transfer
*
the measurement data periodically to your PC, and delete the files in the wrist-
watch (page 45).
Settings to be changed from your PC
The date, clock, on/off and time of the alarm, tire circumference, speed unit, record
interval, total trip distance/total elapsed time, auto-mode setting, sound setting,
and sea level altitude HOME setting.
Past records VIEW LOG
The past records allow you to view the trip distance and elapsed time by time period,
which are essential for your training management.
Total trip distance ( • ODO) and total elapsed time (TTM) since beginning use of this unit
Weekly trip distance and time since Monday •
Monthly trip distance and time since the 1st •
Yearly trip distance and time since January 1st •
You can adjust effectively the training menu by receiving and analyzing the actual
training volume of each period of time.
Completion of
sending