Ecler VERSO P - Manual (Page 4)

4
1. IMPORTANT REMARK
Congratulations. You are now the owner of the result of careful design and exquisite
manufacture. Thank you for having chosen our powered loudspeaker cabinet VERSO P.
In order to get the optimum operation and efficiency from this unit, it is VERY IMPORTANT
- before you plug anything - to read this manual very carefully and bear in mind all considerations
specified within it. We strongly recommend that its maintenance be carried out by our Authorised
Technical services.
2. WARNINGS
This equipment does not contain any parts that can be adjusted by the user.
Do not use this appliance near water.
Do not expose the equipment to splashes.
Do not place receptacles containing water on them.
Do not place the equipment near heat sources, spotlights or stoves.
Use only the accessories specified by the manufacturer that are appropriate for each
connection. Do not hang the equipment by its carry handles.
To ensure effective protection against fire risks, replace the fuse by another of the same
type as indicated on the unit cover.
Keep these instructions and respect the warnings contained in them.
3. INTRODUCTION
The VERSO 8P, 10P and 12P powered loudspeaker cabinet have been designed to cover
a wide range of applications. From conference rooms, where considerable intelligibility is required, to
outdoor applications such as marquees, mobile discos, meetings, presentations, etc. These are
situations in which good sound projection is necessary, together with a high sound pressure level,
reliability of operation and easy placement on stage. The VERSO P series is adapted to a wide
range of applications in which simplicity of installation and use is an important requirement.
All the models are made of high density plastic and protected by an acoustically
transparent perforated grille at the front. All the models have an efficient Larsen high-frequency
protection system (acoustic regeneration or coupling) and signal clipping. The connection plates are
fitted with XLR3 connectors for the audio signal inputs and outputs.