Ecler NPA SERIES - Manual (Page 48)

48
DIGITAL
Processing:
A/D & D/A
24 bit, 96kHz. S/N:110dB/115dB AKM
DSP 32/64 bits
Latency 824
μs
Analog Input headroom: +18 dBV = +21dBu
Digital Input attenuator: Stepless from –
∞ to +0dB
Input Impedance: Balanced, 22k
Ω
Maximum Delay: 1s (343.4m) total for all 2 channels.
Delay resolution: 10.4µs (3mm)
Compressor / Limiter:
Threshold from -36dBV to +18dBV
Ratio 1:1 to
∞:1 (limiter)
Attack time Auto or from 0.1ms to 500ms.
Release time Auto or from 1ms to 5s.
High & Low pass Crossover filters Butterworth in 6/12/18/24dB/oct.
Bessel in 12/18/24dB/oct
Linkwitz-Riley in 12/24dB/oct.
Parametric Eq types (8 max. per output) - Bypass / On-Off all channels
- Param. Eq. 20Hz-20kHz; -60/+12dB; Q from =.3 to 200
- Low & High Shelf 6/12 dB/oct
- Low & High Pass 6/12 dB/oct.
- All-Pass 1/2 order
Built In signal generator - Sine (20Hz to 20kHz)
- Polarity(20Hz to 20kHz)
- White
- Pink
Signal Mute Yes
Signal Polarity Invert Yes
Connectivity: - Ethernet Base-Tx 10/100Mb Auto X-Over Cat5
- Rs-232
- Fault relay N.O./N.C.
- AES / EBU (In / Out) 8kHz to 96kHz (may be optional
on some units).