DVIGear DVI-7010a User Manual
Page 6
DVIGear
-5-
DVI-7010a User Manual
CONTROLLING THE TEST GENERATOR
The generator is controlled via three buttons with status indicated by
OSD.
• Mode Output Button: This button changes the Refresh Rate and the
Resolution of the output.
• + and - Buttons: These buttons change the test pattern being pro-
duced by the unit.
• XGA Reset: Simultaneously depressing the - and + buttons returns set-
ting to factory defaults and sets the output to XGA.
• 480p Reset: Simultaneously depressing the Mode and - buttons returns
settings to factory defaults and sets the output to 480p.
REFRESH RATE AND RESOLUTION
Each time the Mode Output buttons is pressed, the output increments
one step. The available Refresh and Resolution selections are as follows:
Available Refresh Rates and Resolutions
PC
HDTV
SXGA
1280x1024@50/60 Hz
720p-YPbPr
1280x720@50/60 Hz
WXGA 1280x768@50/60 Hz
576p-YPbPr
720x576@50/60 Hz
XGA
1024x768@50/60/70/
75/85 Hz
480p-YPbPr
720x480@50/60 Hz
SVGA
800x600@60/72/
75/85 Hz
1080i-
YPbPr
1920x1080@50/60 Hz
VGA
640x480@60/72/75/
85 Hz
Pseudo Interlace - see
note on pg 5